BTW-Ol
4. Earbuds Matching / TWS Mode
O BLAUPUNKT
Please use this step if two earbuds cannot connect with each other.
4.1 Turn off both earbuds respectively (don't put them into the charging
case).
4.2. Clear the pairing list: Choose one of the earbuds. First, enter into
pairing mode by pressing and holding Touch button for 5s (red and blue
light flashes alternatively). Then hit the touch button 5 times, the red
light will turn on for 1 second. The pairing list will be cleared, and earbud
will emit "Power off" after a "dang" prompt. The other earbud cleans the
pairing list by doing the same.
5 times
4.3 The earbuds will enter TWS / matching mode automatically when
they are turned on (indicator light status: red and blue lights flash
slowly). After successful connection, the master earbud (L) will emit
Connected' and IPairing', after which indicator light status will be: red
LED and blue LED flash alternately (it keeps waiting to be paired with
your phone), while the secondary earbud (R) will emit 'Connected' and
indicator status will be: blue LED flash twice time every 10 seconds.
11
To Next Page
Loading...
