Out-door and in-door temperature
The unit can detect the in-door temperature and show on display
automatically when we power on it. Meanwhile, will search the out-
door temperature signal automatically, and show it on display once
get the out-door temperature transmitter signal and within
working distance (up to 60 meters without obstacle)
When the outdoor temperature digits show “—“, the wireless
transmission is either interrupted or lost. Please try to follow up
below operation.
1. At clock time mode, press and hold button of the weather
station, “- -“ flashes and to start searching for the signal from the
outdoor transmitter.
2. Then press the RESET button of the outdoor transmitter.
3. If you continue to lose the outdoor temperature display, try
placing the outdoor transmitter in a different location until you
have smooth transmission of temperature data.
Specification
Alarm duration 1 hr
Snooze duration 5 to 60 minutes
Default settings:-
Time 0:00
Alarm 1 and 2 6:00
Snooze duration 05 (5 minutes)
Indoor Temp. Range 0℃ to +50℃ (+32℉ to +122℉)
Outdoor Temp. Range -50℃ to + 70℃ (-58℉ to +158℉)
Out of Range Display Temperature: HH.H/ LL.L
Outdoor Temperature Interval every 1 minute
Temperature Resolution 1℃
Transmission frequency 433MHz
Transmission Distance Up to 60 meters (open air with no
obstructions)
Trouble shooting
1. Background noise in FM station
a. Please try to move the unit next window or adjust the
antenna direction for bettere reception.
b. Please tune to other station for listening.
c. Please contact local sevice center for support if problem
remains.
2. The out-door tempeature is missing.
a. Please reference the IM to check the out-door termperature
transmitter or reset the unit.
b. Please contact local sevice center for support in problem
remains.
CR12
10
To Next Page
Loading...
