ENGLISH
7
Sleep
1. At Radio mode, press and hold RADIO/SLEEP to activate the sleep mode, and the
sleep LED will light on. Short press the RADIO/SLEEP repeatedly to adjust the sleep
timer between 5, 15, 30, 45, 60, 75, 90 or OFF.
2. When the display changes back to show the time, press and hold RADIO/SLEEP to
show the sleep remained time.
3. The radio will play for the programmed sleep time and then shut off automatically.
4. To turn off the radio before the sleep time has elapsed, press once.
Trouble shooting
If your clock radio displays irrelevant time or does not function properly, which may be caused
by electro-static discharge or other interference, unplug the DC jack to disconnect the AC
power (and remove the backup battery) and leave it for few minutes before powering it up
again. The clock radio will be reset to default settings and you need to set it again.
Specification
Power source: DC IN 5V/300mA
FM frequency: 87.5~108MHz
Power consumption: 1.5W
Standby power consumption: <1W
Default settings:
Time format 24 hour
Time 0:00
Alarm 1 and 2 6:00
Volume L6 (Level 6)
Snooze duration 05 (5 minutes)
(The above spec may update without prior notice)
Competence Center Audio
2N-Everpol Sp.z o.o.
w przypadku pytań lub problemów
prosimy o konkakt z naszym serwisem.
ln case of questions or problems
please contact our service.
Tel.00 48 22 331 99 53
E-mail: info@blaupunkt-audio.pl
CR6
To Next Page
Loading...
