42
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮ press the 4 RPT button : again.
“RPT OFF” appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
Pausing playback (PAUSE)
➮ Press button 3 :.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 : whilst pause
is activated.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
● Track number and clock time
● Track number and playing time
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “CD DISP” appears
in the display.
➮ Press the or button 7 to
switch between “PLAY TIME” and
“CLOCK”.
➮ Press the MENU button 8 twice.
Random track play (MIX)
➮ Press the 5 MIX button :.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Cancelling MIX
➮ Press the 5 MIX button : again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮ Press and hold down the MENU
button 8 for longer than two sec-
onds.
The next track will then be scanned.
Note:
● You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Cancelling SCAN and continuing
listening to a track
➮ To cancel scanning, press the
MENU button 8.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮ press the 4 RPT button :.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol lights up. The
CD MODE
02EssenMP36 gb 17.02.2006, 14:14 Uhr42
To Next Page
Loading...
Need help?
General
