Blaupunkt ESSEN MP36 User Manual

50
CLOCK time
Displaying the clock time
To display the clock time briefly,
➮ press and hold down the SRC
button 2 until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
➮ press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “CLOCK SET” ap-
pears in the display.
➮ Press the button 7.
The clock time appears in the display.
The hours flash and can be adjusted.
➮ Adjust the hours using the /
buttons 7.
Once the hours are set,
➮ press the button 7.
The minutes flash.
➮ Adjust the minutes using the /
buttons 7.
➮ Press the MENU button 8 twice.
Selecting 12/24-hour clock
mode
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “24 H MODE” or “12
H MODE” appears in the display.
➮ Press the or button 7 to
switch between the modes.
When you have finished adjusting the
setting,
➮ press the MENU button 8.
Displaying the time
continuously when the device is
off and the ignition is on
To display the time when the device is
off and the vehicle ignition is on,
➮ press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “CLOCK OFF” or
“CLOCK ON” appears in the dis-
play.
➮ Press the or button 7 to
switch between the ON/OFF set-
tings.
When you have finished adjusting the
setting,
➮ press the MENU button 8.
Briefly displaying the time
when the device is switched off
To display the time briefly when the de-
vice is off,
➮ press the SRC button 2.
The time is displayed for eight seconds.
CLOCK TIME
02EssenMP36 gb 17.02.2006, 14:14 Uhr50

Blaupunkt ESSEN MP36 Specifications

General

Brand	Blaupunkt
Model	ESSEN MP36
Category	Car Receiver
Language	English