Blaupunkt Fiat Punto CD User Manual

AUTORADIO
622 403 805 BN 07/03
(D) VORSICHT!
Das Gerät beinhaltet eine Laserkomponente!
Im Servicefall nachfolgende Hinweise
beachten:
- Das Gerät arbeitet mit unsichtbarem Laserstrahl. Bei
geöffnetem Gerät tritt im Bereich des Plattenfaches
Laserstrahlung aus.
- Nicht in den Strahl blicken.
- Unbeteiligte Personen vom Arbeitsplatz fernhalten.
- Der Betrachtungsabstand darf 13 cm nicht unterschreiten.
Kann dies nicht eingehalten werden, muß eine geeignete
Laserschutzbrille getragen werden.
(GB) CAUTION!
This unit contains a laser component!
For servicing observe the following important
instructions:
- The unit operates with an invisible laser beam. When
the cover is removed, invisible laser beams are apparent
near the disc compartment.
- Avoid direct eye contact with these beams.
- Keep persons not concerned away from the work bench.
- The viewing distance should not be less than 13 cm.
If this distance cannot be ensured, use suitable laser safety
goggles.
CLASS 1
LASER PRODUCT
UNSICHTBARE LASERSTRAHLUNG
NICHT DEM STRAHL AUSSETZEN
LASER CLASS 3B
• Serviceanleitung / • Service Manual
Abgleich und Programmierungen nur mit Softwaretool (ComServer) möglich
All alignment and programming steps can only be carried out with the ComServer
software tool.
Fiat Punto CC Fiat Punto CD Fiat Punto MP3
7 642 374 316 7 642 375 316 7 642 376 316

Blaupunkt Fiat Punto CD Specifications

General

Brand	Blaupunkt
Model	Fiat Punto CD
Category	Car Receiver
Language	English

Summary

Service Manual and Safety

Service Procedures

Details alignment and programming steps using ComServer software tool.

Laser Safety Precautions

Important warnings and instructions for servicing laser components.

Operating Instructions: Fiat Code

CAN Bus Code Functionality

Explains theft protection via CAN bus, no code re-entry after battery disconnect.

Master Code Entry Procedure

Steps for installing radio from one Fiat vehicle into another using master code.

Connection Box Pinouts

Connector Pin Assignments (A & B)

Connector Pin Assignments (C1, C2, C3)

MAUS Hardware Installation

MAUS Hardware Overview

Installation Warnings

Crucial warnings regarding potential damage to the interface box during installation.

Connection Sequence

MAUS Software and Configuration

Loading Configuration File

Software Commands Overview

Details the commands available in the configuration file for unit testing and programming.