,
EN
14. Playback of Navigation Messages via Bluetooth®
Tip: the cell phone must be connected to the car radio
(see "BLUETOOTH® CONNECTION SETUP")
Tip: if the TWIN CONNECT feature is active, two cell
phones can be connected to the car radio simultaneously. In
this case, select/define the device to be used for audio
streaming.
See "BLUETOOTH® CONNECTION SETUP"
Bluetooth®-BT Navi Mix Operation
The messages of the navigation application active on the
connected cell phone can be played from a current audio
source. To use this feature, turn on the BT NAVI MIX option.
You can then adjust the volume level with the BT NAVI
GAIN (BT NAVI MIX PEGEL) option (see "SETTINGS").
In addition, you can, if needed, also adjust the volume on the
cell phone; refer to the phone manufacturer's manual.
Tip: if the BT NAVI MIX option is active, all audio signals
from the connected cell phone are mixed with a current
audio source; it is not possible to separate or distinguish
the navigation messages from other audio signals from the
cell phone.
15. Bluetooth® Hands-Free System
Tip: the cell phone must be connected to the car radio
(see "BLUETOOTH® CONNECTION SETUP")
Tip: to start using the phonebook, load it with the
DOWNLOAD P-BOOK (T-BUCH LADEN) function.
Incoming calls
Incoming calls are indicated by a ringing tone and a
message on the car radio display.
You can take or reject the call using the phone buttons.
To Next Page
Loading...
