Notes:
a. The supplied USB power cable includes universal USB connector and micro USB connector. The universal
USB connector is for DC adapter connection, and the micro USB connector is for DC power USB jack
connection.
b. Only the supplied power adapter or same rating spec adapter is allow to use for power operation.
c. When you press off power by the power button on front panel, then the unit cannot power on by remote
control due to the power is cut off completely. Please press the power button on front panel to power on
the unit again.
Display back-light adjustment (dimmer)
Press the “ LIGHT” button on remote control can adjust the display back-light brightness between
high/middle and low level.
Time/sleep setting
The unit includes clock time and sleep function. Please follow up below for the operation.
1. Power on the unit, and press the “ MODE” button on remote control, or press the “ M” button on front
panel of unit switch the play mode till the clock time interface show on display. In the first time using this
unit, the unit will enter to clock time interface directly when you power on it.
2. Press the “M” button in 3 seconds on the front panel of unit till the hour digits is flare on display.
3. Then turn the volume knob to adjust the desired hour, and short press the “ M” button to confirm hour
setting, meanwhile the digit for minute is flare on display.
4. Turn the volume knob to adjust the minute setting, and short press the “ M” button to confirm the setting.
Then the unit will enter to the sleep time setting.
5. Turn the volume knob to adjust the sleep time between (off, 15,30,60,90,120) . Then short press the “M”
button to confirm all setting and quit the setting mode.
Notes：
a. During USB/SD/AUX/FM playing mode, press and hold the “ 0” digit button from remote control can check
the current time information in 3 seconds; then resume to current play mode interface.
b. If you have set the sleep time on this unit, the unit will power off automatically when the sleep count time
is on.
Alarm operation
The unit includes 2 alarms which can wake up you when the alarm time is being. Please follow up below for
the setting operation.
1. Press the “ M” button on front panel of unit till enter to the clock time display interface.
2. Press and hold the Play/Pause button till the alarm bell icon flare on display. Turn the volume knob can
switch the alarm1 to alarm 2.
3. Short press the “ M” button to select the alarm that you want to set up; then turn the volume knob to
adjust the alarm hours;
4. Short press the “M” button to confirm the hour setting, and turn the volume knob to adjust the minute
setting.
5. Short press the “ M” button to confirm the minute setting, then the alarm bell icon will flare on the display.
6. Short press the Play/Pause button to switch the alarm between on and off. Then remain the selection.
After 5 seconds, the display will quit from the alarm setting mode to clock time interface. The relative
alarm bell icon will light on display if you selected alarm on, which means the alarm setting is successful.
And the alarm is working now.
7. To set up other alarm, please refer to the above step for operation.
HR5BR
ENGLISH
9
To Next Page
Loading...
