8
1. SD card slot.
2. USB port.
3. AUX-IN jack.
4. Telescope antenna.
5. Vent tube.
6. AC power cord.
7. Speaker.
8. LED indicator.
a. Red color: Standby on.
b. Pink color: FM mode.
c. White color: AUX IN mode.
d. Green color: USB playback mode.
e. Yellow: SD card playback mode.
9. Tuning knob.
10. Standby & mode button.
11. Volume - & previous button.
12. Volume + & next button.
Power on
Before start the radio listening, please connect the AC plug with wall mount
power source. The AC power rating is 230VAC/50Hz. The red color LED will light
on in case of the power connection successfully.
Press and hold the standby button 3 seconds to turn on the unit, press and hold
it to turn off the unit.
Listen to the radio: After turn on the unit, short press the mode button to
switch the mode till the pink LED light on which means enter to FM mode
already; turn the tuning knob to adjust the FM frequency for clear station
listening; Press and hold the volume +/- button to adjust and get the suitable
volume output.
HR7BR
To Next Page
Loading...
