3. Auto tune and fast go-to a specific FM station:
3-1. Press and hold the NEXT/PREVIOUS button in few seconds on control panel or
remote control to auto tune the available station in up or downward frequency.
The unit will stop and auto-play the available station.
3-2. key-in the relative frequency number by digit button from remote control to skip
and play the specific defined FM station. For example, you want to listen the FM
station frequency at: 89.8MHz; then key-in 8-9-8 from remote control; and the unit
will jump and play the station at 89.80MHz frequency accordingly.
USB/SD playback operation
The product includes USB/SD playback function which can decode and playback the
music from a USB/SD storage device. Before start the operation, please copy the MP3
format music into the device; and insert the device into the unit first, because the
USB/SD mode is only available when the device was plugged on unit successfully. Then
the unit will detect and play the inside MP3 music automatically.
1. Track selection: short press the NEXT/PREVIOUS button to select previous and next
track; press and hold the button for fast-forwarding and rewinding the playing music.
Press the digits button from remote control can fast pick up the relative track.
2. In USB mode, you can achieve the play/pause, mute, repeat, EQ, treble/bass function
etc. Please reference the operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not recommended
which may produce noise or intermittent sound due to audio data loss during
transfer.
b. Decode and playback all MP3 format music is not guaranteed.
c. The max supported storage device is 32GB.
d. Some different device and brand may take a little long time to playback; please
kindly note this is not mal-function.
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from
other Bluetooth device (like smart phone, tablet etc).
1. Press the MODE button repeatedly to enter Bluetooth mode, a notice sound will come
out from speaker which means the unit is ready to pair.
2. Enable the Bluetooth function on your device, and search the available device (please
reference the device manual for operation), then check the available Bluetooth
device on the list. Select “ BP (PA/MB series model name)” for pairing.
3. Another notice sound will come out from the speaker after the Bluetooth pairing
successfully.
4. Select and play the music from your Bluetooth device, then the sound will come out
from the speaker
5. Press the previous/next button can select last and next track during playing.
6. In Bluetooth mode, you can achieve play/pause, mute, EQ, treble and bass adjustment
etc. function. Please reference the operation from the general operation part on this
manual.
PA/MB series
10
To Next Page
Loading...
Need help?
General
