Blaupunkt Montreux RCM 45 - Page 5

Montreux RCM 45
20
5 AF - Alternative frequency during RDS
operation
When “AF” lights up in the display, the
radio will automatically search for a
frequency offering better reception of
the same RDS programme.
To switch AF on/off: Press AF briefly.
Extra function:
REG ON / REG OFF - With REG ON
the system will only switch to a better
alternative frequency if the latter be-
longs to a linked station offering the
same regional programme (see “REG -
regional programme).
To switch REG on or off: Press AF until
“REG ON” or “REG OFF” appears in
the display (BEEP tone).
6 lo
To alter the automatic seek tuning sen-
sitivity.
If lo is displayed, the radio will only pick
up strong, local stations (low sensitivi-
ty).
If lo does not light up, the radio will also
pick up weaker, distant stations (high
sensitivity).
To switch over: Press lo briefly.
For more information, see chapter
“DSC programming”.
7 MTL
Press when using metal or CrO
2
tapes.
“...--MTL” lights up in the display.
To switch the function on or off:
Press the MTL button during tape ope-
ration until the desired condition is dis-
played.
8 MIX
Changer operation (optional)
See chapter “CD changer control”.
9 Cassette removal
Press
.
: Cassette loading slot
Insert tape (side A or 1 up; the open
side facing to the right).
; Display
Radio operation:
NDR1 NDS - Station abbreviation
FM - Waveband
T-Memory bank (I, II, T)
5-Preset button (1 - 6)
- Stereo
lo - Seek tuning sensitivity
AF - Alternative RDS frequency
TP - Traffic programme identifier
TA - Priority for traffic programme
stations
LD - Loudness
Tape operation:
TR1--PLAY - Side 1 (or 2)
MTL - Metal
CD changer operation (optional):
CD 05 - Disc number
T 02 - Title number