MS12BT
10
CD operation
The system includes CD playback function which allows you to play CD/-R/-RW/MP3
format disc. Before start the CD playback, please make sure there is no scratch or dirty dot
on the disc which impacts the playing sound quality. Power on the unit, and press the
CD/USD button on remote control, or SOURCE button on front panel of unit in order enter
to the CD playback mode.
1. CD program (FOR CD disc only): in CD playing mode, press the “ STOP” button
first, then press the “ PROG” button and shows “ P 0100” on display; Input the
number of track that you want to be programmed (E.g. input “04”, then the NO.4
track will be programmed as the first playing song). Then the display will skip
and show “ P 0200”. Continuous to Input the relative track number till the
display show “full” in order to complete the track program. Then press the “
PLAY” button to start the programmed track playing.
Press the “ STOP” button twice can cancel the program operation.
To review the sequence of programmed track, please press the “ PROG.” Button
first, then press the “ NEXT” for checking.
2. In CD playback mode, you can achieve the volume adjustment, mute,
play/pause, repeat, fast-forward and fast-rewind, previous and next, and treble
& bass adjustment function after press relative button. You also can fast select
the track by the digit button.
FM radio operation
Before start the FM listening, please kindly full extent the rear FM wire antenna or move
the unit next to the window in order to get better FM reception.
Power on the unit, press the FM button on remote control or SOURCE button on front
panel in order to enter FM mode.
1. Auto tune and preset (all-in-one): short press the “ SEARCH” button on remote
control can tune and save the available station automatically. The unit can save up to
30 preset stations.
2. Auto scan and manual tune：Short press the “ fast-rewind” and ” fast-forward”
button on remote control can increase or decrease the FM frequency per 0.05MHz.
Press and hold the button in 2 seconds can auto scan the available station.
3. Station memory: if you want to save 99.70MHz as the NO.15 preset station,
please input “1,5” from the digit button on remote control, the press the “ F” button
and input the frequency number “ 9,9,7,0” ; and press the SAVE button at last. Then
the station will be saved as preset station NO.15.
4. Get a specific frequency station: in order to get a specific frequency station,
you can input the frequency directly by the digit button on remote control. For
example, you want to listen the radio frequency at “ 104.3 MHz”, you just need press
the F button on remote control frist, then key in 1-4-3 by the digit button of remote
control. Then the unit will skip and play the defined station.
5. Preset station picking up: short press the “ Previous” or “ Next” button on
remote control or front panel can pick up the preset station; Or input preset station
number by digit button on remote control for picking up. For example, you want to
listen the preset station number 12, please just key in 1-2 by remote control, then the
related station will be played.
To Next Page
Loading...
Need help?
General
