MS12BT
12
AUX IN/MP3 LINK playback operation
Using the 3.5mm to 3.5mm stereo audio cable connect with the line out jack of your
player (E.g. mp3 player etc), and connect another terminal of audio cable to the MP3 LINK
jack on the front panel of unit, then press the AUX button on remote control or SOURCE
button on front panel enter to the AUX IN mode. Select the music and start the playing
from your player, then adjust the volume of unit. The music will output from the micro
system speaker.
Please kindly note the main control is from your player in AUX IN mode. You can adjust
the volume from the micro system.
Specification
Power source: ~220V-240v, 50Hz
CD: compatible to CD/-R/-RW/MP3.
FM radio frequency: 87.5~108.0MHz
Bluetooth version: 2.1 + EDR
USB rating: 5V/500mA
USB support device: up to 30GB max.
RMS output: 2 x 10W
Power consumption: 25W
Standby power consumption: <0.5W
Trouble shooting
1. There is no sound from the speaker
a.Check if the volume was turned up;
b.Check if the speaker was connected with main unit properly;
c.Control the local service center for support if the issue still remains;
2. The sound is distorted
a.Please try to turn the volume a little down.
b.Please try to adjust the bass and treble setting.
3. Background noise on FM ration station
a.Please try to extent and adjust the antenna direction, or move the unit next to
the window for better signal reception.
b.Please turn to other station for listening.
4. There have unexpected noise in CD playing
a.Please try to clean the CD disc and replay it.
5. The sound is intermittent output in Bluetooth mode
a.Please try to move your Bluetooth device more close to the speaker.
b.Please turn off the Bluetooth function and re-pairing.
To Next Page
Loading...
Need help?
General
