Radio operation
Before start the radio listening, please try to move the unit next to window and full extent the
antenna; then push the volume potentiometer to power on unit, and adjust volume; turn the
TUNING knob to adjust the radio frequency in order to get station. Push the AM/FM tuner selector
to switch AM or FM tuner for listening.
Headphone: you can connect the headphone with the headphone jack for listening, and then the
sound will output from headphone and mute the loudspeaker.
Reception improvement: Try to move the unit next to window; try to full extent the antenna and
adjust the direction; try to turn another frequency; try to change any position for listening.
Specification
FM frequency: 87.5~108MHz
AM frequency: 530~1600KHz
Output power: 0.8W RMS
Power source: AC 220~240V~50/60Hz
Battery power DC 3V (2 x "UM-1 / C", not include)
Power consumption: 6 W
Standby power consumption: <0.5W
(The above spec may update without prior notice)
5
ENGLISH
To Next Page
Loading...
