Press tuning button to change the setting.
Turn tuning button to change the settings.
Press tuning button to conrm the setting.
Press tuning button to change the setting.
Turn tuning button to change the settings.
Press tuning button to conrm the setting.
Press tuning button to change the setting.
Turn tuning button to change the settings.
Press tuning button to conrm the setting.
Press tuning button to change the setting.
Turn tuning button to change the settings.
Press tuning button to conrm the setting.
Press tuning button to change the setting.
Turn tuning button to change the settings.
Press tuning button to conrm the setting.
Press tuning button to change the setting.
Turn tuning button to change the settings.
Press tuning button to conrm the setting.
Press tuning button to change the setting.
Turn tuning button to change between
the following menu items:
DURBAN224 DAB BT 22.05.19 17:00
20 20
Settings
BALANCE
Left/right BALANCE distribution. Settings: L9
(left) to R9(right).
FADER
Front/Rear FADER distribution. Settings: F9
(front) to R9(rear).
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
PRESET EQ (sound prole)
Selecting equalizer presettings. Settings:
POP, ROCK, CLAS (classic), OFF (no presetting).
SUB-OUT
Setting the level and frequency of the preamplier
output.
– FREQUENCY (settings: 80/120/160 Hz)
– GAIN (settings: 0 to +7)
Press the rotary control to conrm the
setting.
Press the rotary control to change the
setting for the selected menu item.
Turn the rotary control to set the level or
frequency.
AMP DELAY
Setting the delay with which a connect amplier
is switched in.
Settings: 0.5/1.0/1.5/2.0/2.5
seconds and OFF (no delay).
Setting the 3-band equaliser
The radio features a 3-band equaliser. For each of
the three treble, middle and bass bands, you can
select a frequency as well as adjust the level. In ad-
dition, you can adjust the quality factor for bass
and middle. The equaliser also provides an adjust-
able increase of the bass at low volume (X-bass).
Opening the "EQUALIZER" menu
In the "AUDIO" menu, select the "EQUALIZER"
menu item.
Press tuning button to open the menu.
Turn tuning button to change between
the following menu items:
– EQUALIZER
– EQ TREBLE
– EQ MIDDLE
– EQ BASS
– EQ X-BASS
Note:
The submenus in the "EQUALIZER" menu are not
automatically exited after the last key has been
activated. After the setting, press the MENU
button to exit the menu.
EQUALIZER
Switching the equalizer on or o . Settings:
ON, OFF.
Press tuning button to open the menu.
Turn the rotary control to change between
the following menu items:
EQ TREBLE
Adjusting treble frequency and level of the equalizer.
– FREQUENCY (settings: 10/12.5/15/17.5 kHz)
– GAIN (settings: –7 to +7)
Press tuning button to change the setting
for the selected menu item.
Turn tuning button to set the level or
frequency.
Press tuning button to conrm the setting.
EQ MIDDLE
Adjusting centre frequency and level of the
equalizer.