Useful information
Warranty
The warranty terms can be called up from
www.blaupunkt.com.
Additional information on the functions of the
device can be found in the instructions at
www.blaupunkt.com
Service
If you ever need to use a repair service
you will nd information about service partners
in your country under
www.blaupunkt.com.
Technical data
Voltage supply
Operating voltage: 10.5 – 14.4 V
Heavy duty model: 16-24V
10 swc. after swith-o
Current consumption
In operation: < 10 A
: < 3.5 mA
er
Output power: 4 x 24 watts sine at 14.4 V /4 ohms
4x50 watts max. power
Tuner
Wavebands in Europe/Asia/Thailand:
FM: 87.5 – 108 MHz
AM (MW): 531 – 1,602 kHz
LW (Europe only): 153 – 279 kHz
Wavebands in the US:
FM: 87.7 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
Wavebands in South America:
FM: 87.5 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
FM frequency response: 30 – 15,000 Hz
Pre-amp out
4 channels: 4 V
Dimensions and weight
W x H x D: 178 x 50 x 110 mm
Weight: approx. 0.85 kg
DURBAN224 DAB BT 22.05.19 17:00
25 25
Factory settings
|
Technical data
NORMSET
Restoring the original factory settings of the
car sound system.
Press the rotary control and the display
shows "PLEASE CONFIRM".
Press the rotary control again to conrm
the resetting.
The car sound system switches o and is
reset to the factory settings.
Factory settings
Important factory settings in the user menu:
Menu item Factory setting
TUNER AREA
EUROPE
HICUT 1
OFF
OFF
RDS ON
REGIONAL
TRAFFICINFO
SENSITIVITY HI
PTY OFF
TRAFFIC VOL 20
BEEP ON
SCAN TIME 8 SEC
DIMMER MANUAL
HOUR MODE 24
CLOCK SET 00:00
In the user menu, you can restore the original f
actory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET").
To Next Page
Loading...
