41
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Note:
● Any stations previously saved on
this level will be deleted.
➮ Press the BND/TS button 5 for
longer than two seconds.
Storing starts. “TRAVEL-STORE” ap-
pears in the display. When the proce-
dure is complete, the station in memo-
ry location 1 of the FMT memory level
is played.
Going to Pre-set Stations
➮ Select the memory level where the
station is stored.
➮ Press the corresponding button
1 - 6 >.
Scanning Through Available
Stations (SCAN)
You can listen to short samples from all
the stations that can currently be re-
ceived. The length of the samples can
be set, in the menu, to between 5 and
30 seconds.
Starting SCAN
➮ Hold down the OK button ; for
longer than two seconds.
The scanning process starts. “SCAN”
appears briefly in the display, after which
the current frequency is displayed, flash-
ing.
Stop SCAN, continue listening to a
station
➮ Press the OK button ;.
The scanning process is stopped, and
the last station sampled plays.
Setting Scan Time
➮ Press the MENU button 8.
➮ Press the or : until “SCAN-
TIME” appears in the display.
➮ Set the desired sampling time with
the
buttons :.
➮ When the setting process is com-
plete, press the MENU button 8
or OK ; twice.
Note:
● The chosen sampling time also ap-
plies to cassette and CD-changer
scans.
Program Type (PTY)
As well as the station name itself, some
FM stations also supply information
about the type of program being trans-
mitted. This information can be received
and displayed by your radio.
Examples of these program types could
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
Using the PTY function it is possible to
specifically select stations transmitting
a particular program type.
PTY-EON
When the program type has been se-
lected and the search started, the de-
vice changes from the current station
to one with the selected program type.
RADIO OPERATION
To Next Page
Loading...
