37
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Volume Adjustment
The volume can be adjusted in steps
from 0 (off) up to 66 (maximum).
To increase the volume
➮ Turn the volume control 2 to the
right.
To reduce the volume
➮ Turn the volume control 2 to the
left.
Setting Switch-On Volume
The volume the device plays at when
switched on can be adjusted as follows:
➮ Press the MENU button 8.
➮ Press the or button : until
“ON VOLUME” appears in the dis-
play.
➮ Adjust the switch-on volume with
the
buttons :.
If you set “0”, then whatever volume was
in use before the device was switched
off will be reactivated.
Risk of serious injury! If the level
of switch-on volume is set to maxi-
mum, the volume when switching on
may be very high.
If the volume was set to maximum
before switching off, and the value
for the switch-on volume is set to “0”,
the volume when switching on can
be very high. This can damage hear-
ing!
➮ Press the MENU button 8 or OK
;.
VOLUME ADJUSTMENT
Immediate Volume Reduction
(Mute)
You can reduce the volume immediate-
ly (mute) to a pre-set level.
➮ Press button 3 briefly.
“MUTE” appears in the display.
Adjusting Muted Volume
The mute level is adjusted as follows:
➮ Press the MENU button 8.
➮ Press the or button : until
“MUTE LEVEL” appears in the dis-
play.
➮ Adjust the mute level with the
buttons :.
➮ Press the MENU button 8 or OK
;.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mo-
bile telephone or navigation system,
then when the telephone is taken “off
the hook”, or when the navigation sys-
tem is speaking, the car radio is muted.
The telephone conversation or speech
output are reproduced via the car radio
speakers. This requires the mobile tele-
phone or navigation system to be con-
nected to the car radio as described in
the installation instructions.
Your Blaupunkt dealer can tell you which
navigation systems can be used with
your car radio.
To Next Page
Loading...
