Step 7
Write the desired camera name (E.g. “Cam front door”) in the empty
“Name:” field.
Then press the QR code icon and focus with the camera of your
smartphone over the “QR Code” sticker on the camera. After the “QR
Code” was scanned successfully press “next”.
IMPOR
TANT: If it’s a new installation don't change the username or
password here. A mandatory password change will be required in
Step 9.
Step 8
No
te: Only for Wi-Fi configuration. For Ethernet configuration
skip to Step 9
Type the
password of your Wi-Fi network and press “next”.
Note: If
you are using dual-band router, please do not connect
the camera to Wi-Fi of 5G frequency range
Step 9
Connection succeeds. Press on “Start Live Preview”
Step 1
0
For security reasons now type in a new individual camera password.
(Password must contain at least 8 characters, including
at least 2 of the following: Capital letters, small letters, number
and special characters. Please do not use any of the following
characters: & ' , " .
Step 11
Confirm your password and press “save”.
English
5
To Next Page
Loading...
