Connecting to a Computer
The DPF can be connected to a computer via the USB cable for transferring pictures,
music, movies from your computer to its internal memory.
1. Power on your DPF by plugging-in your power adapter and press
2. Connect the small end USB cable to the TF800 and large end to computer.
Your DPF will automatically stop all operations and go to “PC connection” status.
3. The DPF will automatically be detected by your computer. Copy your pictures,
music, movies between DPF and your computer by simply dragging the files into
the drives.
Installing 3DMagic & Making 3D Photo images
1. Connect DPF to your computer via a USB cable.
2. Copy the “3DMagic Setup” software, “3DMagic User’s Guide” and “3DMagic
Demonstration video” from DPF to your computer.
Note: Please backup these three files in a safe location.
3. Delete “3DMagic Setup” software, “3DMagic User’s Guide” and “3DMagic
Demonstration video” in DPF for releasing memory space.
4. In your computer, execute the “3DMagic Setup” software. Install the “3DMagic”
application software by following the Setup Wizard in your computer.
5. Please refer to the “3DMagic User’s Guide” and “3DMagic Demonstration video”
for the guide to the conversion of 2D picture to 3D picture
6. Copy 3D pictures from your computer to DPF via a USB cable.
7. Now, play 3D pictures in your digital picture frame.
To Previous Page
Loading...