BLIIoT S275 - Page 40

Page 40 of 74 Shezhen Beilai Technology Co., Ltd V1.1
Cellular IoT M2M RTU --- S272/S274/S275
will be sent to the authorized number
High alarm SMS
content
When the high limit alarm occurs, "channel name" +
this SMS content will be sent to the authorized
number.
Empty
Low alarm SMS
content
When the low limit alarm occurs, "channel name" +
this SMS content will be sent to the authorized
number.
Empty
Alarm SMS
content
When alarm occurs, "channel name" + this SMS
content will be sent to the authorized number.
Empty
Recovery SMS
content
When alarm restored, "channel name" + this SMS
content will be sent to the authorized number.
Empty
Enable recovery
SMS
Text message will be sent when alarm restored
Uncheck
Relay0
First relay will close when alarm occurs
Uncheck
Relay1
Second relay will close when alarm occurs
Uncheck
Relay2
Third relay will close when alarm occurs
Uncheck
Relay3
Fourth relay will close when alarm occurs
Uncheck
Enable
Enable alarm function
Uncheck
Note: Check "slave alarm" in "alarm numbers settings" page to enable the slave alarm function
4.10.2 Mapping Register
Click “Mapping Register” to view the value of the current slave
Note: If you want to view the current value of the slave, you need to click the [Read] button in the