Bliss RW5 - User Manual

To Next Page

Bliss® Remote Control

Instruction manual model RW5

Scope of delivery

Parts

1 RW-5 remote control

2 2x screw

3 2x wall plug

4 Wall bracket cover

5 CR2450 battery

6 Wall bracket

The Bliss® remote

Item Function

1 Group channels active channel(s) blue backlit

2 Up Move towards top limit

3 Stop Stop blind motion

4 Step down

Move or tilt

III

down in small

increments.

5 Step up

Move or tilt

III

up in small

increments

6 Down Move towards bottom limit

7 Channel previous Select previous channel 1 to 5

or all channels.

8 Channel next Select next channel 1 to 5 or all

channels.

9 L button Removes other remotes

10 T button

No function

11 Battery CR2450 -

12 C button Button to pair product

13 S button

No function

14 Battery lid -

These buttons have no function and can be ignored

The blue backlit active channel goes to sleep after 2 seconds of

inactivity

III

All product types can move up or down in small increments. Tilting

is a light control feature and only possible on product types Venetian

blinds, Double Roller blinds and Vertical Venetian blinds.

Bliss® remote control model RW5

rev. 1.2 (02/2021)

Need help?

Do you have a question about the Bliss RW5 and is the answer not in the manual?

The Bliss® Remote Control (model RW5) is a device designed for operating Bliss® smart blinds. It features a user-friendly interface with clearly labeled buttons for various functions, making it easy to control individual blinds or groups of blinds.

Function Description

The remote control allows users to:

Select Group Channels: The remote supports up to five group channels, indicated by blue backlighting, allowing control over multiple blinds simultaneously or individually. The active channel(s) are backlit in blue.
Control Blind Movement:
- Up (2): Moves the blind towards its top limit.
- Down (6): Moves the blind towards its bottom limit.
- Stop (3): Halts blind motion at any point.
- Step Up (5): Moves or tilts the blind up in small increments. This tilting feature is a light control option available for Venetian blinds, Double Roller blinds, and Vertical Venetian blinds.
- Step Down (4): Moves or tilts the blind down in small increments, also supporting the tilting feature for specific blind types.
Navigate Channels:
- Channel Previous (7): Selects the previous channel (1 to 5) or all channels.
- Channel Next (8): Selects the next channel (1 to 5) or all channels.
Pairing and Removal:
- C button (12): Used to pair the remote with a product.
- L button (9): Used to remove other remotes from a blind.
Non-functional Buttons: The T button (10) and S button (13) are present on the remote but have no assigned function and can be ignored.

Important Technical Specifications

Supply Voltage: 1x 3V CR2450 coin cell.
Battery Lifetime: Greater than 5 years (based on a usage rate of 10 times per day).
Protection Rate: IP20.
Operation Temperature: -20°C to 55°C.
Radio Frequency: ASK 433.92 MHz.
Open Area RF Range: 70 meters. The indoor RF range is typically 35 meters but can vary based on wall thickness and material.
Dimensions (WxHxD): 46x122x11.7mm.
Weight: 55g (including battery).

Usage Features

The Bliss® remote control offers several features for convenient use:

Direct Pairing: Blinds can be paired directly to a group channel on the remote. The process involves selecting a group channel, locating the 'C' button behind the battery lid, putting the motor into pairing mode by pressing its setting button until it jogs, and then confirming by pressing and holding the 'C' button on the remote until the motor jogs again.
App Integration: The Bliss® app can also be used to add or remove remotes, providing an alternative method for managing blind controls.
Remote Removal:
- Removing a single remote: Users can select the group channel operating the blind they wish to remove from the remote, then slide open the battery lid and press the 'C' button a few times until the motor jogs to confirm removal.
- Removing all remotes except one: To keep one remote (A) and remove all others (B and C), select the desired channel on remote (A), slide open its battery lid, and press and hold the 'L' button + down arrow until the motor jogs to confirm that all other remotes are removed.
Backlit Channels: The active group channel(s) are indicated by a blue backlight, which goes to sleep after 2 seconds of inactivity to conserve battery.

Maintenance Features

Battery Installation and Replacement:
- To install, remove the battery lid, orient the CR2450 battery with the '+' symbol facing up, insert it into the socket, and reinstall the cover.
- If group channels no longer light up or the product stops responding, the battery needs replacement. A small flat-head screwdriver can be used to carefully remove the used CR2450 battery.
Disposal Instructions: Batteries should not be thrown away or incinerated. They must be disposed of in accordance with local regulations. Users should contact their local equipment supplier representative for information on waste collection.
Troubleshooting:
- If backlit buttons do not illuminate, check if the battery is inserted properly and is not damaged.
- If the blind does not respond, ensure the integrated li-ion battery of the blind is charged and that the correct group channel has been selected on the remote.

The Bliss® remote control is a comprehensive solution for managing smart blinds, combining ease of use with essential control and maintenance features.

Bliss RW5 Specifications

General

Brand	Bliss
Model	RW5
Category	Remote Control
Language	English