Bliss SUNBRELLA - Tilting the Umbrella; Attach Pole Section; Open Umbrella to Tilt Joint; Engage Tilt Mechanism

Step 1 – Attach bottom part of the pole to the top pole with umbrella.
Step 2
– Crank open umbrella completely until it is above the tilt joint.
(See picture above)
Step 3 – While holding the top of the umbrella with one hand, take
your other hand and press firmly on the button and hold while tilting
the umbrella until the umbrella moves into the tilted position. (See
picture above)
Step 2
The umbrella arms
mechanism is
above the tilt joint.
Step 3
Press and hold button
with one hand while
tilting the umbrella
with your other hand.