R A D I A N T P E R S O N A L H E A T E R S
BLISS RADIANT PERSONAL HEATER
USER MANUAL
Models:
THD160
THD240
THD320
TABLE OF CONTENTS
1. Important Safety Instructions
2. Specification Data
3. Application
4. Installation and Operating Instructions
4.1 Castor Wheel Set
4.2 Mounting Bracket
4.3 Operation
5. Warranty
_____________________________________________________________________
1. Important Safety Instructions
• Prior to installing and operating the heater, read these instructions carefully and retain
for future reference.
• Indoor use only.
• Ensure the rated voltage is 230-240V.
• Do not install the heater directly below a socket.
• If using mounting feet, heater should be positioned on a flat horizontal surface.
• Arrange cord away from traffic areas so that it will not be tripped over.
• Do not place cable under carpets / rugs.
• Do not remove plug from power socket by pulling the supply cord. Always grip plug.
• Do not operate this appliance if the cable or plug becomes damaged.
• In case of heater fault or damaged supply lead, the appliance should be returned to the
distributor / manufacturer for repair.
• Ensure the appliance is switched OFF before connecting to the mains power supply.
• Do not cover heater in any manner, as the appliance may overheat and become a fire risk.
• Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.
• Switch off the power supply and unplug from the mains socket when not in use, before
cleaning or changing accessories.
• Do not immerse in liquid or allow liquid into the interior of the appliance, as this could create
an electric shock hazard.
• Do not reach for an appliance that has fallen into water. Switch off at supply and unplug
immediately.
• Do not operate appliance with wet hands. Always ensure that hands are dry before operating
or adjusting any switch on the product or touching the plug and mains supply connections.
To Next Page
General