Blitz SQ11 - Page 2

 Red on: charging
 Red+blue flashing: Protection shutdown mode orSD card missing
Modes:
 Power -> standby
 Mode-> 720PO-Mode-> 1080PO-Mode-> 12MPixO->
 720p: Power-> ***Record -Power-> standby
 Long-Press-Power -> IR off **
 1080p: Power-> ***Record -Power-> standby
 3Sec-Mode-> ***Motion Record
 12MPix: Power-> *Photo -Power-> standby
 Long-Press-Power -> IR on **
 6Sec-Power -> off
Details:
 720p: Press Power, standby mode, blue LED is on.
 Press Power, blue LED flashes 3 times. Video will save in 5min segments. Press Power
again to go back in standby.
 1080p:Press Power, standby mode, blue LED is on.
 Press Mode, purple(red and blue), LED stay on, 1080p standby mode.
 Press Power, blue light turns off, red light blinks. Video will save in 5min segments. Press
Power again to go back in standby.
 12Mpix:Press Power, standby mode, blue LED is on. Long-pressMode, for 2 red LED
blinks.
 Press Power or Mode, red LED blinks for each photo.
 Infrared on:Press Power, standby mode, blue LED is on. Long-press Powerfor 2 red LED
blinks.
 Infrared off:Press Power, standby mode, blue LED is on, enter any recording mode. Long-
press Powerfor 2 red LED blinks.
 720p Motion detection:Press Power, standby mode, blue LED is on.