1 866 907 0122 blubathworks.com
2020-10
3
51 M2 Mirror Installation continued:
Connect cable (1) from the capacitive switch
to the transformer (G) paying attention to the
+ and - signs of the two poles
Connect clamp (H) with cable (2) of
transformer (G) and cable (3) of the
household power
5
drawing
6
Install the mirror making sure the wall hangers
are perfectly attached to the mirror back frame
channel
7
C
E
In case the mirror is not leveled:
- Remove the mirror carefully
- Adjust mirror inclination with screw (E),
screwed into the lower part of hanger (C)
NOTE: mirror can be mounted
vertically following the instructions
as above.
3
B
cable2
cable1
4
C
cable2
cable3
N
L
To Previous Page
Loading...