BluDento BLT-2 - User Manual

BLT-2
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-2 True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-2. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
customer care team for assistance on eshop@bludento.com
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-2 streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers. BLT-2 is a
true high fidelity component that uses high-end Qualcomm
®
aptX
™
low latency /
AAC / SBC audio streaming codecs and audiophile grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver.
Unlike standard BT receivers, BLT-2 provides ultimate wireless freedom with the
longest wireless range.
IN THE BOX
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
Pairing LED
Toslink
Optical
Output
Coax
Audio
Output
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
• BluDento BLT-2
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
TROUBLESHOOTING TIPS
My device does not pair with BLT-2.
• Ensure that BT is turned ON on your device.
• Make sure that the LED indicator is blinking and your device is as close to
BLT-2 as possible.
• Restart the BLT-2 and cycle BT on your device in order to
re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
• Check whether no other devices are connected. If so, either disconnect or
turn off BT on the other devices till it flashes, then try connecting.
• Close the BT function of all your BT devices and open
them again.
The sound quality is poor and / or the audio is cutting out.
• Move your device or BLT-2 away from cordless phones, routers,
microwave ovens or other BT devices.
• Try moving your device closer to BLT-2.
• Turn off your device’s Wi-Fi.
• Try unpairing and repairing your device to BLT-2.
• Check that your device’s OS is updated to the latest version.
Only one channel plays music.
• Check the cables between BLT-2 and your stereo system.
• Check your BT device, music player APP and home theater to ensure
that the audio balance is centered.If you have any further queries please
contact us on eshop@bludento.com
The LED indicator is solid and my device is connected but there
is no audio output.
• Ensure that the BLT-2 output is correctly connected to your audio system.
• Check whether the audio source is correctly selected on your music system
(Analog audio or digital optical/coaxial input).
• Verify the volume levels on your BT device, player APP and home theater.
Please confirm all are not mute
• Try unpairing and repairing your device to BLT-2.
The volume output level from BLT-2 is Low.
• Verify the volume levels on your BT device, player APP.
• Also check the volume levels on your powered speakers or stereo system.
Please confirm all are not on mute.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-2 to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-2 rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-2 with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-2 will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-2” to pair and connect. The LED
indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-2 from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-2 can connect to one smart
device at a time, but is capable of remembering up to 8 devices.

Summary

Welcome

In The Box

Quick Setup

Troubleshooting Tips

My device does not pair with BLT-2

Ensure BT is ON, device is close, restart BLT-2 and cycle BT.

The LED Indicator is solid, but I cannot connect my device

Check other devices, disconnect/turn off BT on others, close/reopen BT function.

The sound quality is poor and; or the audio is cutting out

Move device/BLT-2 away from interference, move closer, turn off Wi-Fi, re-pair.

Only one channel plays music

Check cables, ensure audio balance is centered on device and system.

The LED indicator is solid and my device is connected but there is no audio output

Ensure correct output connection, selected audio source, and volume levels are not muted.

The volume output level from BLT-2 is Low

Verify volume levels on device, app, and speakers/system; confirm not muted.

Product Safety

Safety Instructions

Technical Specifications

Warranty

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The BluDento BLT-2 is a True Hi-Fi BT Music Receiver designed to stream high-definition digital music wirelessly from your Bluetooth-enabled device to your existing Hi-Fi audio system or powered speakers. It aims to deliver a high-fidelity audio experience by utilizing advanced audio streaming codecs and an audiophile-grade Digital-to-Analog Converter (DAC).

Function Description:

The primary function of the BLT-2 is to act as a bridge between your Bluetooth-enabled smart devices (such as tablets, computers, or smartphones) and your traditional audio setup. It receives audio signals wirelessly via Bluetooth and outputs them through various audio connections to your stereo system, allowing you to enjoy your digital music collection with enhanced clarity, crispness, and emotional impact. Unlike standard Bluetooth receivers, the BLT-2 emphasizes extended wireless range, providing greater freedom in device placement.

Usage Features:

• Wireless Music Streaming: The BLT-2 enables wireless audio transmission from any Bluetooth-enabled device, eliminating the need for physical audio cables between your source device and your audio system.
• High-Quality Audio Codecs: It supports high-end audio streaming codecs including Qualcomm® aptX™ Low Latency, AAC, and SBC. The inclusion of aptX Low Latency is particularly beneficial for reducing audio delay, which can be important for video synchronization.
• Audiophile-Grade DAC: The device incorporates an audiophile-grade DAC (specifically, the TI PCM5102A) to ensure superior sound conversion, aiming to unleash the full potential of your Hi-Fi stereo system.
• Multiple Audio Outputs: The BLT-2 offers versatile connectivity options to integrate with a wide range of audio systems. It provides Stereo Analog RCA outputs for traditional analog connections, as well as Digital Optical (TOSLINK) and Coaxial (SPDIF) outputs for digital audio transmission.
• Easy Setup and Pairing: The setup process is designed to be straightforward. Users connect the BLT-2 to their music system via audio cables and then connect a power adapter. The unit automatically enters pairing mode, indicated by a blinking blue LED. Pairing with a Bluetooth device involves turning on Bluetooth on the device, scanning for "BLT-2," and selecting it to connect. Once connected, the LED indicator turns solid blue.
• Memory for Paired Devices: The BLT-2 can remember up to 8 paired devices, simplifying reconnection for frequently used devices. While it can only connect to one smart device at a time, its memory function streamlines the process of switching between different source devices.
• Antenna for Enhanced Range: The device includes an external antenna that can be rotated (left, right, and up) to optimize signal reception and extend wireless range. Users are advised not to rotate it downwards.
• LED Indicators: A clear LED indicator provides visual feedback on the device's status. A blinking blue light signifies that the unit is powered on and in pairing mode, ready to be connected. A solid blue light indicates an active Bluetooth connection.

Maintenance Features:

• Troubleshooting Guide: The user manual provides a comprehensive troubleshooting section to address common issues such as pairing difficulties, connection problems (solid LED but no connection), poor sound quality, audio cutting out, single-channel playback, and low volume output.
• Customer Support: For further assistance beyond the troubleshooting guide, users are directed to contact the customer care team via email.
• Product Safety Guidelines: The manual emphasizes product safety, cautioning users against improper use that could lead to electrical shock or fire hazards. It advises reading all safety and operating instructions carefully and keeping them for future reference.
• Modification Warning: Users are explicitly warned against making unauthorized modifications or changes to the product, as this could void the compliance and the user's authority to operate the equipment.
• General Care Instructions: Basic maintenance advice includes keeping the product dry, avoiding extreme temperatures, not dropping the product, keeping it out of direct sunlight or hot areas, and not using chemicals or detergents for cleaning.
• Warranty Information: The BluDento BLT-2 is covered under a warranty, with details available on the manufacturer's website.
• No User-Serviceable Parts: To reduce the risk of electric shock, users are advised not to remove the cover or back of the device, as there are no user-serviceable parts inside. Servicing should be referred to qualified service personnel.

BluDento BLT-2 Specifications

General

Product Type	Bluetooth Receiver
Bluetooth Version	5.0
SNR	120dB
Power Supply	USB-C
Bluetooth Profiles	A2DP, AVRCP
Frequency Response	20Hz - 20kHz
Signal-to-Noise Ratio	120dB
Charging Time	2 hours
Playback Time	10 hours
Standby Time	300 hours
Operating Range	10 meters
Charging Port	USB-C
Bluetooth Codec Support	aptX HD, aptX, SBC, AAC, LDAC
Output	3.5mm