To Next PageTo Next Page
Need help?Do you have a question about the Blue point BP301 and is the answer not in the manual?
General| Model | BP301 |
|---|---|
| Category | Power Tool |
| Tool Type | Impact Wrench |
| Power Source | Pneumatic |
| Drive Size | 1/2 inch |
| Free Speed | 8000 RPM |
| Blows Per Minute | 1200 BPM |
| Air Inlet Size | 1/4 inch NPT |
| Hose Size Recommended | 3/8 inch |
Overview of the BP301 tool's features, productivity, and repairability.
Guidelines for preparing the tool and work area, including acceptable base materials and tests.
Interpreting results of the center punch test to determine material suitability for fastening.
Guidance on choosing appropriate power loads and essential safety practices.
General safety precautions for operators and bystanders to prevent injury.
Procedures for safe handling, loading, storage, and general operation of the tool.
Detailed technical data including length, weight, load caliber, and fastener capacity.
Critical safety rules to follow during fastener driving operations to prevent injury.
Step-by-step instructions for safely handling a misfire event.
Overview of the tool's applications and general fastening guidelines for best results.
Specific guidelines for safe and effective fastening in concrete, including edge distances.
Guidelines for fastening into concrete blocks or masonry walls, emphasizing edge distance.
Guidelines for fastening onto flat surfaces of structural steel, including spacing.
Procedure to check the tool's functionality before use.
Step-by-step instructions for loading and firing the BP301 tool.
Common problems, their causes, and recommended solutions for the tool.
Instructions for cleaning and maintaining the tool for optimal performance.
Detailed steps for disassembling and repairing a damaged piston.
Instructions for reassembling the BP301 tool after maintenance or repair.
