Blue Robotics BlueROV2 - Page 6

5/20/2019 BlueROV2 Heavy Configuration Retrofit Kit Installation - Blue Robotics
https://www.bluerobotics.com/learn/bluerov2-heavy-configuration-retrofit-kit-installation/ 6/28
5. Cut and remove any zipties holding the motor wires for Thrusters 5 and 6 to the frame.
(https://www.bluerobotics.com/wp-content/uploads/2019/03/heavy-tutorial-4.jpg?x62571)
6. Remove the 4” Electronics enclosure from the ROV by removing the M3x16 screws that mount the enclosure to the
ROV cradle.
Privacy - Terms