11
POOL MAINTENANCE & DRAINING (CONTINUED)
6. Remove all connecting parts.
7. Be sure that the pool and all parts are completely dry before storage. Air dry the liner in the sun
until it is completely dry before folding (see drawing 1). Sprinkle some talcum powder to prevent
the vinyl from sticking together and to absorb any residual moisture.
8. Create a square shape. Starting at one side, fold one-sixth of liner into itself twice. Do the same on
the opposite side (see drawings 2 & 3).
9. Once you have created two opposing folded sides, simply fold one over the other like closing a
book (see drawings 4 & 5).
10. Fold the two long ends to the middle (see drawing 6).
11. Fold one over the other like closing a book, and nally compact the liner (see drawing 7).
12. Store the liner and accessories in a dry, temperature-controlled storage location above 32°F (0°C)
and below 104°F (40°C).
13. The original packaging can be used for storage.
1
4
3
2
5
6
7
To Next Page
Loading...
