ASSEMBLY INSTRUCTIONS (CONT.)
18. Two-Person Models Only: Remove the back cover of the OXYGEN IONIZER by turning is as
indicated. Unwrap and install the fragrance patch, then reattach the back cover. Attach the
OXYGEN IONIZER in the designated position with 3/4” SCREWS. Plug the power cable into the
OXYGEN IONIZER.
19. Plug the main power cable into a dedicated outlet. Note: No other appliances should share
the same outlet with this sauna.
The assembly of your sauna is now complete.
Please review the Operation Instructions and Health & Safety warnings before using your
sauna.
To ensure years of trouble-free use, follow the Cleaning & Maintenance guidelines carefully.
10
CONGRATULATIONS!
To Next Page
Loading...
