TROUBLESHOOTING
If the mouse and keyboard stop working please try following:
• Check the polarity (+/-) on batteries, maybe they are not inserted correctly.
• Change batteries for new ones if necessary.
• If you are mouse is not working well, try to use it on mouse pad.
• Make sure the USB Receiver is plugged into a USB and the computer is on.
• Connect the receiver into the USB port and press the mouse's middle & right buttons for
about 5 seconds and release. The mouse will move the onscreen cursor to indicate a
successful connection.
• Press the ESC+ = keys on the keyboard for another 5 seconds. The battery low indicator
will flash to indicate a connection.
Cautions:
• Read all instructions carefully and keep this manual for future reference. Please install
the appliance with the instruction guide to use.
• Risk of explosion if battery is replaced by an incorrect type and dispose of used
batteries according to the instructions.
• Do not use water, detergents, abrasive cleaning liquids or chemical agents to clean
the appliance.
• Before you clean the appliance, take the battery out.
• If the appliance is not used for a long time, please take the battery out.
To Previous Page
Loading...