02
Contents
Instructions (continued)
1. Analyse the surface for any scratches or imperfections that can be identified by touch or
easily by sight. These need to be removed with sanding paper before any work can be
done.
2. After the surface is clean, dry and sanded, select your chosen buffing tool and insert it
into an electric drill or bench grinder (maximum 3000rpm).
3 PCE Buffing wheels: 50mm, 75mm & 100mm
4 PCE Polishing buffs: 50mm & 75mm
5 PCE Woollen mounted points: ball, cone, tapered round, round & bullet
6 PCE Polishing compound: green stainless, white diamond, brown tripoli,
black emergy, red rouge, blue.
To Next Page
Loading...