To Next PageTo Next Page
Need help?Do you have a question about the BLUGUARD SmartBus P900-S32 Series and is the answer not in the manual?
General| Brand | BLUGUARD |
|---|---|
| Model | SmartBus P900-S32 Series |
| Category | Control Panel |
| Language | English |
Lists critical warnings and cautions for system operation and safety, including battery handling and installation requirements.
Step-by-step instructions for arming the system in AWAY mode, including exit delay.
Instructions for arming the system in DAY mode, suitable for when users remain on premises.
Instructions for arming the system in NIGHT mode, for users remaining on premises.
How to force arm the system, allowing certain zones to be bypassed temporarily.
Arming the system for extended absences, includes simulated occupancy features.
Procedure for arming the system using an optional remote control unit or key-switch.
How the system can automatically arm itself based on a programmed schedule.
Instructions for remotely arming the system via a telephone or GSM hand phone.
Step-by-step guide to disarm the system using the keypad with a user code.
Procedure for disarming the system using an optional remote control unit or key-switch.
How the system can automatically disarm itself based on a programmed schedule.
Instructions for remotely disarming the system via a telephone or GSM hand phone.
How to temporarily disable specific zones from triggering alarms when the system is armed.
Procedure to re-enable zones that were previously bypassed.
How to manually trigger a FIRE alarm or what happens during smoke detector activation.
How to manually trigger a PANIC alarm via keypad or fixed/remote panic buttons.
How to manually trigger a MEDICAL alarm via the keypad.
Explanation of the duress code for disarming the system under threat.
Explanation of how the system can be divided into multiple independent security areas.
General guidance on arming the system when it is configured with partitions.
Instructions for simultaneously arming all four partitions in AWAY mode.
Procedure to arm a single specific partition in AWAY mode.
Using a fast key combination to arm a single partition in AWAY mode.
Instructions for arming a specific partition in DAY mode.
Instructions for arming a specific partition in NIGHT mode.
How to arm a specific partition in FORCE ARM mode.
Arming a specific partition in HOLIDAY mode for extended absences.
Steps to enter the user programming mode using the keypad and master code.
Instructions on how to exit the user programming mode.
How to set or change the master code and individual user codes.
Procedure for programming or changing the system's duress code.
Instructions on how to erase existing user or duress codes from the system.
How to set the system's internal clock and timers for accurate operation.
How to set automatic arming timers for each partition (1-4).
How to erase previously programmed auto arming timers for partitions.
How to set automatic disarming timers for each partition (1-4).
How to erase previously programmed auto disarming timers for partitions.
How to set timers for automatically turning Home Automation points ON.
How to erase previously programmed auto ON timers for Home Automation.
How to set timers for automatically turning Home Automation points OFF.
How to erase previously programmed auto OFF timers for Home Automation.
How to program personal telephone numbers for system reporting.
How to erase previously programmed personal telephone numbers.
How to program GSM telephone numbers for system reporting.
How to erase previously programmed GSM telephone numbers.
Procedure to perform a walk test for on-site verification of each zone's functionality.
How to test the connection and reporting to the central monitoring station.
Procedure to test the siren functionality of the security system.
Procedure to test the strobe light functionality of the system.
How to test the system's backup battery functionality.
