Assembly (detail):
Connect the waterpipe with the pump as shown above. Convey the cables out of the plinth (for this pur-
pose there is a notch on one side of the lid). Connect the cables with the solar panel and place the panel
near the fountain.
Usage:
Press ON (on the rear of the solar panel). The SOLAR POWERED LED goes on. O
Drücken Sie ON (auf der Rückseite des Solar-Panels). Die „Solar-Powered“-LED leuchtet. Surplus energy
will be used to recharge the internal pump battery. A fully charged battery allows the pump operate for
6 - 8 hours.
8
To Next Page
Loading...
