EasyManua.ls Logo

Blumfeldt Pantheon Cortina - User Manual

Blumfeldt Pantheon Cortina
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Pantheon Cortina
Pergola
10033318 10033319 10035883 10035884 10035895 10035896
Question and Answer IconNeed help?

Do you have a question about the Blumfeldt Pantheon Cortina and is the answer not in the manual?

Blumfeldt Pantheon Cortina Specifications

General IconGeneral
Material RoofPolyester
Water repellentYes
UV resistantYes
Dimensions3 x 3 meters
Weight30 kg
MaterialSteel, Polyester
ColorBeige
Water ResistanceYes
UV ResistanceYes

Summary

ZUSAMMENBAU; ASSEMBLY

Step 1: Post Assembly

Repeat the process described in the circle on all 4 posts.

Step 2: Base Plate Attachment

Repeat the process described in the circle on all 4 posts.

Step 3: Connecting Beams

Repeat the procedure described in the circle twice.

Step 4: Frame Structure

Repeat the process described in the circle on all 4 posts.

Step 5: Roof Mechanism Installation

Repeat the process described in the circle on all 4 posts.

Step 6: Frame Reinforcement

Repeat the process described in the circle on all 4 posts.

Step 7: Final Frame Securing

Repeat the process described in the circle at the other end.

Step 8: Detailed Part Assembly

Insert the two parts N3 into N2. Join F5 and F6 together.

Step 9: Further Part Assembly

Attach two parts N3 to N2. Screw E3 halfway in.

Step 10: End Cap Installation

Insert a total of 8 end caps.

Step 11: Repeat Step Twice

Repeat this step twice.

Step 12: Side Attachment

Repeat the process described in the circle on the other side.

Step 13: Cross Post and End Process

Repeat process on 4 cross posts and both ends.

Step 14: Final Beam Attachment

Secure beams D and F2 using parts T.

Step 15: Component T Attachment

Attach component T to the frame.

Step 16: Canopy Support Attachment

Attach components W, D, I.

Step 17: Roof Panel Mounting

Attach roof panels N using G, G2, AA.

Step 18: Base and Corner Fixings

Secure base L and corner M.

Step 19: Final End Fixings

Repeat process on all 4 ends using M and L.