Installation and user manual – Dynamicroll® Frigo 1
INDEX
1. INTRODUCTION
2. TRAINING
3. GENERAL SAFETY INSTRUCTION
4. SAFETY SYMBOLS
5. TERMS AND DEFINITIONS
6. MOVING
7. LABELS
8. TECHNICAL SPECIFICATIONS
CE Marking and position
Type
Weight
Main Components
Safety devices and guards
9. INTENDED USES AND USAGES LIMITS
10. INSTALLATION
General safety instruction
Installation mode
Fixing
Curtain tension
Safety light curtain fixing
Control panel components
Electrical connections [ENCODER + PHOTOCELLS (SPIDER CABLE)]
Electrical connections [ENCODER + SAFETY LIGHT CURTAIN]
Electrical connections [DEVICES WITHOUT SPIDER CABLE]
11. CONTROL BOARD
Electrical power connection - Dip Switch SW1 function and LED meaning BMP2_V04/05/06
Manual Jog and display
Setting (open/close position and dwell time setting)
Pedestrian opening setting
Interlock (needs programmer not provided with the door)
12. OPERATING MODES AND ADVANCED SETTINGS
Advanced settings (needs programmer not provided with the door)
13. ALARMS
14. MANUAL OPERATION
15. NOISE
16. PERIODIC MAINTENANCE AND CHECKS
17. PRODUCT DISPOSAL AND RECYCLING
18. WARRANTY
19. TECHNICAL ASSISTANCE
20. FACSIMILE CE DECLARATION OF CONFORMITY
ANNEX
- ANNEX A – UPS_BMP_400V USER AND INSTALLATION MANUAL
- ANNEX B – VISUAL CHECKS AND TESTS
- ANNEX C – MAINTENANCE BOOK
To Next Page
Loading...