Installation and user manual – Dynamicroll® Frigo 1
Installation mode
Before proceeding with the installation operations, it is necessary to check the dimensions of the compartment
with respect to the dimensions of the door. Check for any protrusions.
Out of the door way installation
Fixing
Before installing the door, check that the floor, the existing walls or the support structure have the necessary
strength requirements, suitable to support the weight of the door, also considering the dynamic thrusts due to
normal operation and to any impacts . Possibly make the necessary structural changes that must be made
before giving rise to the installation.
Temporarily fix the columns to the wall and then lift the top heading and connect it to the columns (detail A)
To Next Page
