Indicator light is illuminated: Dynamic
Stability Control failure or initialising.
No driving stabilisation.
Have the system checked immediately by a
Service Partner of the manufacturer or another
qualified Service Partner or a specialist work-
shop.
Automatic programme change
Dynamic Stability Control can be activated au-
tomatically by the front-collision warning, de-
pending on the situation.
Dynamic Traction Control
Principle
Dynamic Traction Control is a drive-optimised
variant of Dynamic Stability Control.
In special road conditions, for example on un-
cleared, snow-covered roads or on loose sur-
faces, the system ensures maximum drive, but
with restricted driving stability.
General
Maximum traction is provided when when Dy-
namic Traction Control is activated. Driving
stability is restricted when accelerating and
cornering.
Activating Dynamic Traction Control briefly
may be useful in the following situations:
▷
When driving in slush or on uncleared,
snow-covered roads.
▷ When driving off in deep snow or on a loose
surface.
▷ When driving with snow chains.
Overview
Button in the vehicle
DSC OFF
Activating/deactivating Dynamic
Traction Control
1.
Press the button to open the selec-
tion.
2. "Traction"
The TRACTION display and the indicator
lamp for the Dynamic Stability Control light
up in the instrument cluster.
3. Press the button again to reactivate
Dynamic Stability Control.
The TRACTION display and the indicator
lamp for the Dynamic Stability Control go
out in the instrument cluster.
Display
In the instrument cluster
TRACTION: Display in the instrument cluster
when Dynamic Traction Control is activated.
Indicator and warning lights
Indicator light illuminates: Dynamic
Traction Control is activated.
Seite 196
CONTROLS
Driving stability control systems
196
Online Edition for Part no. 01405A5E758 - VI/22
To Next Page
