Filling
1. Shake the tyre sealant bottle.
2. Pull filler hose completely out of the cover
of the tyre sealant bottle. Do not kink the
hose.
3. Push the tyre sealant bottle into the holder
on the compressor housing, until it audibly
engages.
4. Screw the filler hose of the tyre sealant bot-
tle onto the tyre valve of the faulty wheel.
5. With the compressor switched off, insert the
plug into the socket inside the vehicle inte-
rior.
6. Switch on the compressor with standby
state or drive-ready state switched on.
Let the compressor run for max. 10 minutes to
fill in the tyre sealant and reach a tyre inflation
pressure of 2 bar.
While the tyre is being filled with tyre sealant,
the tyre pressure can briefly rise to approx.
5 bar. Do not switch off the compressor during
this step.
Seite 294
MOBILITY
Wheels and tyres
294
Online Edition for Part no. 01405A5E758 - VI/22
To Next Page
