Parking brake
Applying the parking brake
Pull the switch.
The LED on the switch and the indica-
tor light in the instrument cluster are
illuminated.
Release the parking brake
With drive-ready state switched on:
Press the switch with the brake applied
or the selector lever in position P.
The LED and the indicator light go out.
The parking brake is released.
Parking
Make sure the parking brake is engaged.
Light and vision
Turn indicator, high-beam
headlight, headlight flasher
Turn indicators
▷ Flashing: press the lever past the resist-
ance point.
▷ One-touch signalling: lightly tap the lever
up or down.
▷ To indicate a turn briefly: press the lever as
far as the resistance point and hold it there
for as long as you wish to indicate a turn.
High-beam headlight, headlight
flasher
Press the lever forwards or pull it back.
▷
High-beam headlight on, arrow 1.
The high-beam headlight is illuminated
when the low-beam headlight is switched
on.
▷ High-beam headlight off/headlight flasher,
arrow 2.
Seite 30
QUICK REFERENCE
On the move
30
Online Edition for Part no. 01405A5E758 - VI/22
To Next Page
