EasyManua.ls Logo

BMW 2 Series - Page 34

BMW 2 Series
376 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wheels and tyres
Tyre inflation pressure information
The tyre inflation pressure information can be
found on the tyre pressure label on the body
pillar of the driver's door.
After adjusting the tyre inflation
pressure
If equipped with a Tyre Pressure Monitor, tyre
inflation pressure corrections are applied auto-
matically. Make sure that the tyre settings are
correct. For tyres that are not listed in the tyre
inflation pressure information on the control
display, reset the Tyre Pressure Monitor.
If equipped with a Flat Tyre Monitor, reinitialize
the Flat Tyre Monitor.
Checking the tyre inflation pressure
Check regularly and adjust as necessary:
At least twice a month.
Before a long journey.
Electronic oil measurement
Operating requirements
A current reading is available after approxi-
mately 30 minutes of normal driving.
Displaying the engine oil level
1.
"MENU"
2. "Vehicle apps"
3. "Vehicle status"
4. "Engine oil level"
The engine oil level is displayed.
Topping up engine oil
General
Stop the vehicle safely and switch off drive-
ready state before topping up with engine oil.
Topping up engine oil
1. Open the bonnet.
2. Turn the cap anticlockwise to open.
3. Add engine oil.
4. Tighten cap.
How to get assistance
Hazard warning lights
Hazard warning lights button
Seite 34
QUICK REFERENCE
On the move
34
Online Edition for Part no. 01405A5E758 - VI/22

Other manuals for BMW 2 Series

Related product manuals