BMW 2 Series - Page 75

turer or another qualified Service Partner or a
specialist workshop.
If a BMW ID or driver profile has been assigned
to the lost vehicle key, the connection to this
vehicle key must be deleted. A new vehicle key
can then be assigned to the BMW ID or driver
profile.
Replacing the battery
NOTICE
Unsuitable batteries in a battery-operated
device can damage the device. There is a
risk of material damage. Always replace the
discharged battery with a battery with the
same voltage, the same size and the same
specification.
1.
Remove the integrated key from the vehicle
key.
2. Position the integrated key under the bat-
tery compartment lid, arrow 1, and pry off
the lid by moving the lever of the integrated
key, arrow 2.
3. Use a pointed object to press the battery in
the direction of the arrow and lift it out.
4. Insert a type CR 2032 3V battery with the
positive terminal facing up.
5. Press the cover back into position and close
it.
6. Insert the integrated key into the vehicle
key until the integrated key engages.
Dispose of old batteries with a Service
Partner of the manufacturer, another
qualified Service Partner or a specialist
workshop, or hand them in to an authorised
collection point.
Integrated key
General
The integrated key enables the vehicle to be
unlocked without the vehicle key.
Depending on the national-market version, the
integrated key fits the glove compartment.
Depending on the model and equipment, the
key switch for the front passenger airbag can
be operated with the integrated key.
Safety information
WARNING
With some national-market versions, unlock-
ing from the inside requires specific knowl-
edge.
Seite 75
Opening and closing
CONTROLS
75
Online Edition for Part no. 01405A5E758 - VI/22