Switching on/off
Press the button.
The LED is illuminated with the system
switched on.
Air flows out of the vents to the upper body re‐
gion. The vents need to be open for this.
The air flow can be adjusted with the program
active.
AUTO program
Concept
The AUTO program cools, ventilates or heats
the car's interior automatically.
The air flow, air distribution and temperature will
be controlled automatically depending on the in‐
terior temperature and the setting for the desired
temperature.
Switching on/off
Using the button:
Press the button.
The LED is illuminated with the AUTO
program switched on.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Automatic"
Depending on the selected temperature and out‐
side influences, the air is directed to the wind‐
shield, side windows, upper body, and into the
floor area.
Air conditioning is switched on automatically with
the AUTO program.
Point the side vents toward the side windows.
The AUTO program is switched off automati‐
cally, when manual air distribution is set.
Recirculated-air mode
Concept
You may react to unpleasant odors or pollutants
in the immediate environment by temporarily
suspending the supply of outside air. The system
then recirculates the air flow within the vehicle.
Operation
Using the button:
Press the button.
The LED is illuminated when recircu‐
lated-air mode is switched on. The supply of out‐
side air is shut off.
When recirculated-air mode is switched off, fresh
air is directed into the vehicle's interior.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Air quality"
5. Select the desired setting:
▷ "Air recirculation"
▷ "Automatic"
▷ "Fresh air"
To prevent window fogging, recirculated-air
mode switches off automatically after a certain
amount of time, depending on the environmental
conditions.
With constant recirculated-air mode, the air qual‐
ity in the car's interior deteriorates and window
fogging increases.
If there is window condensation, switch off recir‐
culated-air mode or defog the windows.
Air flow, manual
Concept
The air flow for climate control can be adjusted
manually.
Seite 269
Climate control
CONTROLS
269
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
Need help?
General
