Symbol Meaning Symbol Meaning
Not suitable for child restraint systems. Suitable for ISOFIX child re‐
straint systems.
Suitable for child restraint systems in the Univer‐
sal category that have been approved for use in
this weight group.
Suitable for ISOFIX and i-
Size child restraint systems.
Suitable for child restraint systems in the Semi-
Universal category if the vehicle and the seat are
listed in the list of vehicle models from the manu‐
facturer of the child restraint system.
Suitable for child restraint
systems with an upper re‐
taining strap.
Left-hand drive vehicles: Which
child restraint systems can be used
on the seats
Information about which child restraint systems
can be used on the seats in question in accord‐
ance with the ECE-R 16 and ECE-R 129 stand‐
ard.
Seat position 1 3 4 5 6
Seat position suitable for
universal fastening with a
belt.
No Yes Yes Yes Yes
i-Size seat position. No No Yes No Yes
Seat position suitable for
side mounting: L1/L2.
No No No No No
Largest rear-facing mount‐
ing: R1/R2X/R2/R3.
No No R3 No R3
Largest front-facing mount‐
ing: F2X/F2/F3.
No No F3 No F3
Largest suitable booster
mount: B2/B3.
No No B3 No B3
Not compatible with i-Size seat position with a support stand: cannot be used.
Seat position with lower ISOFIX anchors, but without Top Tether: cannot be used.
Seat belt buckles for adults are located on the side between the two lower ISOFIX anchors: cannot
be used.
Seite 136
CONTROLS
Carrying children safely
136
Online Edition for Part no. xxx - VI/19
To Next Page
Loading...
