or objects are detected on the front passenger
seat.
Check whether the seat belt has been fastened
correctly.
Seat belt reminder for rear seats
Seat belt on the corresponding rear seat
is not fastened.
Airbag system
Airbag system and belt tensioner may be
faulty.
Immediately have the vehicle checked by
a Service Partner of the manufacturer or another
qualified Service Partner or a specialist work‐
shop.
Parking brake
The parking brake is engaged.
Release the parking brake, see
page 147.
Brake system
Brake system malfunctioning. Continue
driving at moderate speed.
Immediately have the vehicle checked by
a Service Partner of the manufacturer or another
qualified Service Partner or a specialist work‐
shop.
Yellow lights
Anti-lock Brake System ABS
Braking force boost may be faulty. Avoid
sudden braking. Bear in mind that the
braking distance will be longer.
Have the vehicle checked immediately by a Serv‐
ice Partner of the manufacturer or another quali‐
fied Service Partner or a specialist workshop.
Dynamic Stability Control DSC
If the indicator lamp is flashing: DSC is
regulating the acceleration and braking
forces. The vehicle is being stabilised.
Decrease speed and adjust driving style to the
road conditions.
If the indicator lamp is illuminated: DSC has
failed.
Immediately have the system checked by a Serv‐
ice Partner of the manufacturer or another quali‐
fied Service Partner or a specialist workshop.
DSC, see page 229.
Dynamic Stability Control DSC
deactivated, or Dynamic Traction
Control DTC activated
DSC is deactivated or DTC is activated.
DSC, see page 229, and DTC, see
page 231.
Runflat indicator RPA
The runflat indicator reports a loss of tyre
inflation pressure in a tyre.
Reduce your speed and carefully stop
the vehicle. Avoid heavy braking and sudden
steering manoeuvres.
Runflat indicator, see page 353.
Tyre Pressure Monitor TPM
The indicator lamp illuminates: the Tyre
Pressure Monitor is reporting a low tyre
inflation pressure or a flat tyre. Note the
information in the Check Control message.
The indicator lamp flashes and then illuminates
continuously: no flat tyres or loss of tyre inflation
pressure can be detected.
▷ Fault due to systems or devices with the
same radio frequency: the system is auto‐
matically reactivated upon leaving the field of
interference.
Seite 163
Displays
CONTROLS
163
Online Edition for Part no. xxx - VI/19
To Next Page
