EasyManua.ls Logo

BMW 318D - Page 172

BMW 318D
430 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Displaying and using the list
Button Function
To change the entertainment
source.
Press the button again to close
the list currently displayed.
Display the last calls list.
Turn the knurled wheel to se‐
lect the desired setting.
Press the knurled wheel to con‐
firm the setting.
The list that is currently selec‐
ted can be displayed in the in‐
strument cluster again by turn‐
ing the knurled wheel.
Journey data
Principle
Values relating to the journey, such as the aver‐
age consumption or the trip distance, are dis‐
played.
General
The journey data can be shown on the Control
Display and in the instrument cluster.
The values can be displayed and reset according
to different intervals; for example, after refuelling.
Display on the Control Display
Overview
The following information is displayed:
Set interval for resetting the journey data.
Average consumption, fuel.
Average speed.
Total time engine is switched off by Auto
Start Stop function.
The route covered in the coasting drive state.
Consumption history as a diagram.
Displays
Via iDrive:
1. "CAR"
2. "Driving information"
3. "Journey data"
Consumption history
The consumption history shows the average
consumption in a diagram as a function of the
route covered and the driving mode.
Display in the instrument cluster
Information about the stretch of road can be dis‐
played as a widget in the revolution counter. Se‐
lecting and setting widgets in the instrument
cluster, see page 160.
The following information is displayed:
Total distance driven
Set interval for resetting the journey data.
Route covered, depending on the set interval.
Average speed.
Resetting journey data
The intervals at which the values are reset can
be adjusted.
Via iDrive:
1.
"CAR"
2. "Driving information"
3. "Journey data"
4. "Values since"
5. Select the desired setting:
"Start of journey ( )": the values are reset
automatically if the vehicle is at a standstill
for approximately four hours.
Seite 172
CONTROLS
Displays
172
Online Edition for Part no. xxx - VI/19

Related product manuals