Practical interior equipment
82
are carried, however, the capacity of the ski bag
is lower in view of its tapered design.
Loading
1. Fold down the centre armrest.
2. Press the button, reach into the recess and
fold down the hinged cover.
3. Open the Velcro fastener, spread the ski
bag between the front seats and insert the
skis or snowboards.
The zip fastener makes objects in the ski
bag easier to reach.
4. Insert the tongue of the ski bag's retaining
strap in the centre belt buckle.
Make sure that skis and snowboards are
cleaned before being inserted into the ski bag.
Wrap protective material around sharp edges to
prevent damage.
Securing the load
After loading the ski bag, secure the bag and its
contents by tightening the retaining strap at its
turnbuckle.
Secure the ski bag in the manner
described, as it could endanger the car's
occupants, e.g. in case of heavy braking or sud-
den swerving.<
To stow away the ski bag, follow the opposite
procedure as for loading.
Removing the ski bag
You can remove the ski bag for quick drying, for
example, or if you want to use other fittings.
1. Fold down the centre panel in the rear-seat
backrest.
2. Pull the handle, arrow 1.
3. Take out the fitting, arrow 2.
For more information on the various fit-
tings available, contact BMW Service.<
Online Edition for Part-No. 01 41 0 159 204 - © 03/05 BMW AG
To Next Page
Loading...
