Safety switch
Concept
The safety switch can be used to prevent chil‐
dren, for instance from opening and closing the
rear windows using the switches in the rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Switching on/off
Press the button.
The LED lights up if the safety function
is switched on.
Rear window roller
sunblind
Safety information
NOTICE
When operating the roller sunblind, objects
stored on the shelf may damage the roller sun‐
blind. There is a risk of damage to property.
Make sure that the area of movement of the
roller sunblind is clear during the operation.
Overview
Button for the roller sunblind.
Operation
Press the button to open the closed
roller sunblind or to close the open roller
sunblind.
If the button is pressed again during the move‐
ment, the roller sunblind is moved in the oppo‐
site direction.
System limits
If you are no longer able to move the roller sun‐
blind after having activated it consecutively a
number of times, the overheating protection
mechanism is active. The system is blocked for a
limited time to prevent overheating. Let the sys‐
tem cool.
The roller sunblind cannot be moved at low inte‐
rior temperatures.
Roller sunblinds, rear side
windows
Safety information
Warning
With closed roller sunblinds and open windows,
the roller sunblinds may be strained while driv‐
ing due to the wind. The roller sunblinds may
be damaged and vehicle occupants may be
harmed. There is a risk of injury. Do not open
the windows while driving if the roller sunblinds
are closed.
Pull out the roller sunblind at the strap and hook
it onto the bracket.
Glass sunroof
General information
The glass sunroof and the sun protection are op‐
erated using the same switch.
Seite 104
CONTROLS
Opening and closing
104
Online Edition for Part no. 01405A11338 - VI/20
To Next Page
Loading...
Need help?
General
