BMW 520D - Page 52

52n
Seat adjustment, electric
*
>
Push the switch forward or back: the
curvature is increased or decreased.
>
Press the switch at top or bottom: the
curvature is increased at the top or
bottom.
Shoulder support:
Push the switch forward or back: the
angle of the upper part of the seat back
changes.
The adjustable upper section of the
seat back supports the shoulder area of
the seat occupant's body. It enables a
relaxed seat position to be found and
reduces the load on the shoulder
muscles.
To obtain the recommended optimum
settings:
Driver's and front passenger's side:
1. Tilt the upper part of the seat back
fully to the rear
2. Adjust to the most suitable position,
as described on page 49
530de252
3. Tilt the upper section of the seat
back forwards until adequate
shoulder support is obtained.
Passenger's seat in rest position:
1. Tilt the upper part of the seat back
fully to the rear
2. Set the seat angle to a slightly more
upright position
3. Recline the seat back slightly more to
the rear
4. Tilt the upper section of the seat
back forwards until adequate
shoulder support is obtained.
Correct the forward/back position
of the seat if necessary to ensure
that the seat belt still passes closely
over the wearer's body, otherwise its
protective action may be affected.
<
ba.book Page 52 Tuesday, December 17, 2002 4:26 PM